ACO Drain

ACO - trench drain leader

ACO - world leader in trench drains

hh
MiniKlassik

Small trench drain systems for regularly foot trafficked balconies or pavements where a discrete barrier is required to separate wet and dry areas. Grates have been load tested in accordance with AS 3996 guidelines up to Class D (8 tonnes vehicles)

wide grate choices
polymer concrete
polymer concrete
QuickLok
anti-shunt lugs
narrow width
end profiles
Interconnecting
end profiles
allows easy and effective joining of channels.
Appropriate sealant can be used.
Drill out
40mm drill-out
allows vertical evacuation at male end of channel at any point along the run.
Choice of grates
in stainless steel or ductile iron and Heelsafe® Anti-Slip for applications up to Load Class D.
Half meter sections
Integrally cast-in galvanised steel edge rail
provides additional strength and protects the channel edge from damage. (Stainless steel edge rail also available)
profiled side walls

Profiled side walls
strengthening ribs provide channel body strength and mechanical keying to concrete encasement.
Narrow width
50mm internal width
85mm overall depth
Shallow depth
100mm internal width
60mm overall depth
 

   MiniKlassik Grates

M50K grates

Length
mm

Part
No.

Wgt
(kg)

Wheel Chair High Heel Bike Safe

Spec
Info

LOAD CLASS B - AS 3996 - 80kN - approximate wheel load 2,760 kg
Stainless 5 Star Heelsafe Anti-Slip Grate

Stainless 5 Star
Heelsafe® Anti-Slip

1000

141761

2.3

tick
tick
tick
tick
PDF
LOAD CLASS D - AS 3996 - 210kN - approximate wheel load 8,000 kg
Iron Intercept Heelsafe Anti-Slip Grate

Iron Intercept
Heelsafe® Anti-Slip

500

95553

3.3

tick
tick
tick
tick
PDF

 

 

   Heelsafe® Anti-Slip grates  

legislative requirementsAt ACO, we believe that pedestrian friendly grates and slip resistance go hand in hand. The grates with the trademark, Heelsafe® Anti-Slip comply to all four specific user requirements; heelsafe, wheelchair and walking cane safe, bicycle safe and are slip rated.

A slip resistance classification is assigned to these grates. AS 4586 sets out three recognised tests that determine slip resistance: wet pendulum test (P-rating), wet-barefoot inclining platform test (A, B or C rating) and oil-wet inclining platform test (R-rating). HB 198 references AS 4586 by specifying the minimum slip resistance ratings dependent on the application.

Grates with raised mechanical nodes have excellent durability compared with those produced by manufacturers who apply coatings or mechanically alter (bead blast etc...) to attain a level of slip resistance. These processes will not only ensure a short term slip resistance due to the wearing process but can introduce impurities in the material which will accelerate corrosion.

ACO’s range of Heelsafe® Anti-Slip grates have raised mechanical nodes and are available in plastic, stainless steel and ductile iron, for more information visit www.heelsafe.com.au

   MiniKlassik Parts List


M50K Channels

50mm internal width
Part No.
Invert1
mm
Weight
kg
Galv
S/S
Neutral channel - (1m)
04071
06750
74
8.2
End cap
95403
894
0.1

Notes:
1. For overall depth add 15mm to invert depth.
2. Preformed 38mm dia. drill-out to underside of channel.
3. MiniKlassik does not fit with any ACO pit - discharge via vertical outlet only.
4. Overall depth of end cap.

   MiniKlassik Specification Information (Spec Info) Sheets

MiniKlassik Trench System

M50K/M50KS Trench Grates

 

   MiniKlassik Site Installation Files

Range System AS 3996 Grass PAVERS 1  PAVERS 2  ASPHALT 1  ASPHALT 2 CONCRETE
haunch to top pavers to edge haunch to top sloped haunch haunch to top haunch to top
MiniKlassik

M50K

A-B pdf  dwg pdf  dwg   pdf  dwg   pdf  dwg
C-D   pdf  dwg   pdf  dwg   pdf  dwg
M50KS A-B pdf  dwg pdf  dwg   pdf  dwg   pdf  dwg
C-D   pdf  dwg   pdf  dwg   pdf  dwg