ACO Drain

ACO - trench drain leader

ACO - world leader in trench drains


hh

K300 / H300K Grates

   300mm Trench Drain Grates by Load

  

300mm grates

Length
mm

Part
No.

Wgt
(kg)

Wheel Chair High Heel Bike Safe

Spec
Info

Water
Intake

LOAD CLASS B - AS 3996 - 80kN - approximate wheel load 2,670kg
Type 847D/848D
Stainless Wedgewire1
Heelsafe® Anti-Slip
1000
500
142223
142224
12.5
6.2
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate
Stainless 5 Star Heelsafe Antislip grat Type 843D/844D
Stainless 5 Star1
Heelsafe® Anti-Slip
1000
500
142225
142226
12.5
6.2
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate
Stainless 5 Star Heelsafe Antislip grat Type 841D/842D
Stainless Twinwire1
Heelsafe® Anti-Slip
1000
500
142560
142561
15.1
7.6
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate
Stainless 5 Star Heelsafe Antislip grat Type 839D/840D
Stainless Splitwire1
Heelsafe® Anti-Slip
1000
500
142573
142574
14.1
7.1
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate
Type 807Q/808Q
Galvanised Transverse2
1000
500
142413
142414
12.4
6.3
cross
cross
tick
cross
PDF
Click here to check the hydraulics for this grate
LOAD CLASS D - AS 3996 - 210kN - approximate wheel load 8,000kg
Type 805Q
Galvanised Mesh2
500
142409
12.7
cross
cross
tick
cross
PDF
Click here to check the hydraulics for this grate

Type 830Q
Stainless Mesh2

 

500
142410
15.1
cross
cross
tick
cross
PDF
Click here to check the hydraulics for this grate
Type 880D
Iron Wave1
Heelsafe® Anti-Slip
500
142463
21.8
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate
Type 860D
Iron Slotted
500
13870
19.0
tick
cross
tick
cross
PDF
Click here to check the hydraulics for this grate
Type 876D
Iron Intercept1
Heelsafe® Anti-Slip
500
142175
15.9
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate
Type 875D
Iron Galv Intercept1
Heelsafe® Anti-Slip
500
142176
15.9
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate

Notes:

1 - Meets ASME A112.6.3 Section 7.12 (American high heel standard).
2 - Denotes QuickLok grates. QuickLok bar included in grate Part Number.

   300mm Trench Grates Specification Information (Spec Info) Sheets

KlassikDrain / SlabDrain HK Series
K300
KS300
H300K / H300KS
Channels & In-line Pits
PDF
PDF
PDF
Stainless Wedgewire Heelsaferegistration mark Anti-Slip Grates (Class B)
PDF
Stainless 5 Star Heelsaferegistration mark Anti-Slip Grates (Class B)
PDF
Stainless Twinwire Heelsaferegistration mark Anti-Slip Grates (Class B)
PDF
Stainless Splitwire Heelsaferegistration mark Anti-Slip Grates (Class B)
PDF
Galvanised Transverse Grates (Class B)
PDF
Steel Mesh Grates (Class D)
PDF
Iron Wave Heelsaferegistration mark Anti-Slip Grates (Class D)
PDF
Iron Slotted Grates (Class D)
PDF
Iron Intercept Heelsaferegistration mark Anti-Slip Grates (Class D)
PDF
Iron Galvanised Intercept Heelsaferegistration mark Anti-Slip Grates (Class D)
PDF

 

   Heelsafe® Anti-Slip grates  

legislative requirementsAt ACO, we believe that pedestrian friendly grates and slip resistance go hand in hand. The grates with the trademark, Heelsafe® Anti-Slip comply to all four specific user requirements; heelsafe, wheelchair and walking cane safe, bicycle safe and are slip rated.

A slip resistance classification is assigned to these grates. AS 4586 sets out three recognised tests that determine slip resistance: wet pendulum test (P-rating), wet-barefoot inclining platform test (A, B or C rating) and oil-wet inclining platform test (R-rating). HB 198 references AS 4586 by specifying the minimum slip resistance ratings dependent on the application.

Grates with raised mechanical nodes have excellent durability compared with those produced by manufacturers who apply coatings or mechanically alter (bead blast etc...) to attain a level of slip resistance. These processes will not only ensure a short term slip resistance due to the wearing process but can introduce impurities in the material which will accelerate corrosion.

ACO’s range of Heelsafe® Anti-Slip grates have raised mechanical nodes and are available in plastic, stainless steel and ductile iron, for more information visit www.heelsafe.com.au


   QuickLok locking system

QuickLok

Comprised of a glass nylon stud, factory fitted to the grate, which allows a snap fit into a stainless steel spring clip in the locking bar. With no loose bolts or bars, QuickLok provides highly secure boltless locking, that is easy to remove/replace for maintenance and cleaning. Saves time and money during installation.

QuickLok installation

Locate locking bar in recesses, rotate and use hammer to tap securely into place. Serrated ends grip in recess.
K200/K300 channels use plastic safety clip to hold in place.
To install grate, align QuickLok stud directly over locking bar.
Push down or stand on grate until it clicks into position.
To remove first grate, insert grate removal tool into slots at end of grate, pull up sharply. Rest of grates can be removed by hand.
To remove bar, insert screwdriver into hole at end of bar and lever back serrated end, rotate bar free.

   DrainLok locking system

DrainLok - barless and boltless locking system

Fast locking device removes the need for bars and bolts and improves the channels hydraulic capacity. The DrainLok mechanism simply clips into the channel edge rail for quick installation. ACO’s DrainLok grates are fitted with anti–shunt lugs that restrict grate movement when installed, improving durability and longevity of the system.

Drainlock locking system

Position grate onto channel and align anti–shunt lugs with the recess in the rail.
Push down or stand on the grate until it clicks into position.
To remove first grate, insert grate removal tool into slots at the end of the grate and pull up sharply. Remaining grates can be removed by hand.