ACO Drain

ACO - trench drain leader

ACO - world leader in trench drains


hh

K200 / H200K Grates

   200mm Trench Drain Grates by Load

  

200mm grates

Length
mm

Part
No.

Wgt
(kg)

Wheel Chair High Heel Bike Safe

Spec
Info

Water
Intake

LOAD CLASS B - AS 3996 - 80kN - approximate wheel load 2,670kg
Type 647D/648D
Stainless Wedgewire1
Heelsafe® Anti-Slip
1000
500
142219
142220
7.5
3.7
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate
Type 643D/644D
Stainless 5 Star1
Heelsafe® Anti-Slip
1000
500
142221
142222
7.5
3.7
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate
Stainless Twinwire Heelsafe grate Type 641D/642D
Stainless Twinwire1
Heelsafe® Anti-Slip
1000
500
142558
142559
9.0
4.5
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate
Stainless Splitwire Heelsafe grate Type 639D/640D
Stainless Splitwire1
Heelsafe® Anti-Slip
1000
500
142571
142572
8.3
4.2
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate
Type 607Q/608Q
Galvanised Transverse2
1000
500
142411
142412
7.8
4.2
cross
cross
tick
cross
PDF
Click here to check the hydraulics for this grate
LOAD CLASS D - AS 3996 – 210kN - approximate wheel load 8,000kg
Type 605Q/606Q
Galvanised Mesh2
1000
500
142405
142406
13.8
7.1
cross
cross
tick
cross
PDF
Click here to check the hydraulics for this grate
Type 630Q/631Q
Stainless Mesh2

 

1000
500
142407
142408
13.0
6.6
cross
cross
tick
cross
PDF
Click here to check the hydraulics for this grate
Type 680D
Iron Wave1
Heelsafe® Anti-Slip
500
142462
12.7
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate
Iron Slotted grate Type 660D
Iron Slotted
500
142177
12.0
tick
cross
tick
cross
PDF
Click here to check the hydraulics for this grate
Type 676D
Iron Intercept1
Heelsafe® Anti-Slip
500
142173
10.0
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate
Type 675D
Iron Galv Intercept1
Heelsafe® Anti-Slip
500
142174
10.0
tick
tick
tick
tick
PDF
Click here to check the hydraulics for this grate

Notes:

1 - Meets ASME A112.6.3 Section 7.12 (American high heel standard).
2 - Denotes QuickLok grates. QuickLok bar included in grate Part Number.

   200mm Trench Grates Specification Information (Spec Info) Sheets

KlassikDrain / SlabDrain HK Series
K200
KS200
H200K / H200KS
Channels & In-line Pits
PDF
PDF
PDF
Stainless Wedgewire Heelsaferegistration mark Anti-Slip Grates (Class B)
PDF
Stainless 5 Star Heelsaferegistration mark Anti-Slip Grates (Class B)
PDF
Stainless Twinwire Heelsaferegistration mark Anti-Slip Grates (Class B)
PDF
Stainless Splitwire Heelsaferegistration mark Anti-Slip Grates (Class B)
PDF
Galvanised Transverse Grates (Class B)
PDF
Steel Mesh Grates (Class D)
PDF
Iron Wave Heelsaferegistration mark Anti-Slip Grates (Class D)
PDF
Iron Slotted Grates (Class D)
PDF
Iron Intercept Heelsaferegistration mark Anti-Slip Grates (Class D)
PDF
Iron Galvanised Intercept Heelsaferegistration mark Anti-Slip Grates (Class D)
PDF

 

   Heelsafe® Anti-Slip grates  

legislative requirementsAt ACO, we believe that pedestrian friendly grates and slip resistance go hand in hand. The grates with the trademark, Heelsafe® Anti-Slip comply to all four specific user requirements; heelsafe, wheelchair and walking cane safe, bicycle safe and are slip rated.

A slip resistance classification is assigned to these grates. AS 4586 sets out three recognised tests that determine slip resistance: wet pendulum test (P-rating), wet-barefoot inclining platform test (A, B or C rating) and oil-wet inclining platform test (R-rating). HB 198 references AS 4586 by specifying the minimum slip resistance ratings dependent on the application.

Grates with raised mechanical nodes have excellent durability compared with those produced by manufacturers who apply coatings or mechanically alter (bead blast etc...) to attain a level of slip resistance. These processes will not only ensure a short term slip resistance due to the wearing process but can introduce impurities in the material which will accelerate corrosion.

ACO’s range of Heelsafe® Anti-Slip grates have raised mechanical nodes and are available in plastic, stainless steel and ductile iron, for more information visit www.heelsafe.com.au


   QuickLok locking system

QuickLok

Comprised of a glass nylon stud, factory fitted to the grate, which allows a snap fit into a stainless steel spring clip in the locking bar. With no loose bolts or bars, QuickLok provides highly secure boltless locking, that is easy to remove/replace for maintenance and cleaning. Saves time and money during installation.

QuickLok installation

Locate locking bar in recesses, rotate and use hammer to tap securely into place. Serrated ends grip in recess.
K200/K300 channels use plastic safety clip to hold in place.
To install grate, align QuickLok stud directly over locking bar.
Push down or stand on grate until it clicks into position.
To remove first grate, insert grate removal tool into slots at end of grate, pull up sharply. Rest of grates can be removed by hand.
To remove bar, insert screwdriver into hole at end of bar and lever back serrated end, rotate bar free.

   DrainLok locking system

DrainLok - barless and boltless locking system

Fast locking device removes the need for bars and bolts and improves the channels hydraulic capacity. The DrainLok mechanism simply clips into the channel edge rail for quick installation. ACO’s DrainLok grates are fitted with anti–shunt lugs that restrict grate movement when installed, improving durability and longevity of the system.

Drainlock locking system

Position grate onto channel and align anti–shunt lugs with the recess in the rail.
Push down or stand on the grate until it clicks into position.
To remove first grate, insert grate removal tool into slots at the end of the grate and pull up sharply. Remaining grates can be removed by hand.