ACO Drain

ACO - trench drain leader

ACO - world leader in trench drains


hh

KlassikDrain Accessories

A complete trench drain solution requires more than just channels and grates. Correct solution of outlets to plumbing pipework (outlets through In-line pits or direct pipe connection) plus closing caps at starts and ends of trench and other items such as pipe outlet connections, installation devices, strainers and foul air traps are all part of a complete system.

 

   End Cap

Closing cap - Fits all channels. Manufactured from grey ABS to complement edge rail. Guides aid cutting to correct height. 100mm bell end connection (K100), 100mm and 150mm bell end connection (K200), 150mm, 200mm and 250mm bell end connection (K300) to pipe. Seal using PVC-ABS cement.

K100 end cap

K100 - 100mm

Part Number - 96822

K200 end cap

K200 - 100mm + 150mm

Part Number - 96821

K100 end cap

K300 - 150mm + 200mm + 250mm

Part Number - 96826

   Installation device & template

Installation devices are used to align channels to create a complete trench run. Once the installation is complete using these devices the concrete is poured around the device and channels. Installation devices allow a single concrete pour.

Installation Device Instructions
Installation Template Drawings

 

Installation device 100mm


Installation device 200mm

Installation device 300mm

For 100mm wide channels

Part Number - 97477

For 200mm wide channels

Part Number - 97478

For 300mm wide channels

Part Number - 97479

 

   Vertical outlet strainer - 100mm bottom outlet only

Strainer for 100mm vertical outlets, prevents large particles of debris flowing into underground pipe system and causing blockages.
 
strainer
  1. Flexible prongs fit inside 100mm pipe
  2. Lip on both sides hangs
    strainer from base of channel
outlet strainer